Tutorials ========= In short, the localisation consists of the following steps: #. Note in which CBs the FRB was detected. #. Save a snippet for the detection CBs, as well as for all surrounding CBs. #. Create a configuration file with the settings to use to S/N determination #. Run ``arts_calc_snr`` #. Add localisation settings to the configuration file, using coarse resolution #. Run ``arts_run_localisation`` #. Repeat the previous step with different settings until the entire uncertainty region is covered #. Re-run the localisation at high resolution The below tutorials go through these steps with examples: .. toctree:: :maxdepth: 1 tutorial_repeater/intro tutorial_driftscan/intro